Phone: +0086 21 54315773           Fax: +0086 21 54315979             E-Mail: sales@sh-stcomm.com               English              中文
Welcome to Shanghai STCOMM
≡  PRODUCTS LIST
Optical Fusion Splicer---STC-OFS701
    Publish time 2019-02-20 11:09    
Optical Fusion Splicer---STC-OFS701
The fusion splicer adopt high-speed image processing technology and special precision- positioning technology, automatically finish the whole process of fiber fusion in 8 seconds typically, LCD monitor displays all steps of fiber fusion clear at a glance. 
Widely used for SM and MM Quartz Fiber with diameter 80-150μm, coating layer diameter 0.1-1.0mm and bare fiber length 16mm more or less.
Ideal tools for construction and maintenance of fiber and cable in both field and laboratory applications.          

High-resolution true color 5.7 inch LCD display; 
The advanced core to core fiber profile alignment system(PAS);
Real time calibrating system ,don’t need to adjust the parameter, X/Y axes were displayed meanwhile, Magnification up to 304 times;
8 seconds splicing time, 30 seconds Heat-Shrinking;
Battery capacity was display in real time, precisely;
Built-in high capacity battery, support 220 times splicing and heating, to meet one days’ work;
Long lifetime of electrodes, up to 4000 times;
Three Splicing modes: auto, half-auto and manual;
Built-in super high-brightness LED supply convenience for night work;
Calculate splicing loss automatically;
Small bulk and light weight, only 2.8kg include battery;
4000 results Storage;
USB data interface &VGA;
One button operation to finish results download or software update;
Close shield splice automatically, Close heater lid heat automatically.
Technical Specifications

Optical Specifications

OFS

Fiber Types

Single mode (ITU-T G.652), multimode (ITU-T G.651), dispersion shifted (ITU-T G.653), non-zero dispersion shifted (ITU-T G.655)

Average Splicing Loss

0.02dB with G.652, 0.01dB with G.651 and 0.04dB with G.653 and G.655

Splicing & Heating Time

Typical splicing time:8s, Typical heating time:30s

Return Loss

60dB or greater

Fiber Coating

100μm to 1000μm

Fiber Cladding

80μm to 150μm

Fiber Cleave Length

816mm(coating diameter<250µm), 16mmcoating diameter 2501000µm

Program

10 units factory setting SM program, 10 units factory setting MM program,               and 30 units user setting SM program,30 units user setting MM program

Align Mode

Advanced profile alignment system(PAS)

Storage

4000 results

Data Transmission

USB port &VGA

Heater

Auto Heat Mode, the typical heating time is 30 seconds

Heat-Shrinkable Tube

40mm60mm and a series of micro Heat-Shrinkable Tubing

Screen Display

Two CMOS cameras,5.7 inch 640*480 LCD., core of the fiber is clearly visible

Lighting for Construction

Built-in super High-brightness LED supply convenience for night work

Magnifications

Vertical 152timeshorizontal 304times

Work mode

Automatic, Half Automatic, Manual

General Specifications

Power Supply

Alternating Current:100-240 50Hz/60Hz 30W, Direct current:13.5V/4.5A            Built in 11.1V Li-ion battery charger and AC adaptor

Battery Life

Support 220 times splicing and heating on one charge(3.5hours) at least

Battery Lifetime

Cycle life up to 300500 times, replaceable

Tension Test

2N

Electrode Lifetime

>4000 times, replaceable

Operating Temperature

-25 ~ 50

Storage Temperature

-40 ~ 80

Relative Humidity

0 to 95 (non-condensing)

Work Altitude

0~5000 meters

Instrument Weight

2.3kg(no battery ), 2.8kg(including battery)

Dimensions(L x W x H)

160mm×150mm×140mm

Package G.W/N.W

8.0/7.0kg

Package (L x W x H)

500mm×350mm×400mm

Standard Configuration:
Instrument (Main Body), Fiber Cleaver, Fiber Coat Stripper, Internal Battery, Charger, AC Power Cord, 2G USB Flash Disk, Spare Electrodes (one pair), Cooling Tray, Alcohol Pump Bottle, Carrying Case, Carrying Belt, User's Manual, LCD Cover.