STComm bench-top laser source series of 1.0 um high stable ASE laser source, this instruments adopt optimized Ytterbium doped fiber laser device optical circular, and used together with 980 SM pump laser device of telecom level, to realize high quality output on the laser source. The instrument based on advance micro-processer system, and use high precision ATC and ACC(APC) electric circuit control to realize high stable output, and easy operation of the laser source.
This high stable ASE laser source featured with high stable output, and long-term output power even better than 1%, the design of high stable electric circular control and thermal control grantee the laser source provide a very high stable output.
This ASE laser source have high resolution LCD displayer, continuous output power adjustable, circular, and voltage display simultaneously, which is an ideal instrument used in the lab for research and factory for producing testing. Furthermore, we also can provide module packing which convenience for clients system comprise.
Application:
• Fiber Optic Test and Measurement
• Optical fiber sensing system
• optical fiber gyro
• Spectrum Analysis
• Lab experiment.
Features:
• SM fiber output
• 0~100% adjustable of the output power
• Output power precision can be controlled
• High stable and high reliability.
• Statue LCD displaying
Specifications:
|
Technical parameters |
Unit |
Technical data |
||
|
Minimum. value |
Typical Value |
Maximum. Value |
||
|
Product Model: |
|
STC-OLS-1.0umASE-SM：SM STC-OLS-1.0umASE-PM：Polarization |
||
|
Output power1 |
mW |
10 |
- |
100 |
|
Operation wavelength range |
nm |
1035 |
- |
1080 |
|
Spectrum width（FWHM） |
nm |
- |
45 |
- |
|
Spectrum flatness（standard type） |
dB |
- |
4 |
- |
|
Spectrum flatness（Grain flatness） |
dB |
- |
2 |
5 |
|
Optical Output isolation |
dB |
30 |
35 |
- |
|
Output power stability2（15mins.） |
% |
- |
±0.5 |
±1.0 |
|
Output power stability 2（8hrs.） |
% |
- |
±1.0 |
±2.0 |
|
Adjustable output power range |
% |
0 |
- |
100 |
|
Output power adjusted mode |
|
Coarse adjusted/delicate adjusted |
||
|
Working voltage |
VAC |
170 |
220 |
260 |
|
Power consumption 3 |
W |
- |
- |
20 |
|
Operation temperature |
℃ |
0 |
- |
50 |
|
Storage temperature |
℃ |
-40 |
- |
85 |
|
Output fiber（SM） |
|
SMF 6/125um NA=0.13 |
||
|
Output fiber （Polarization） |
|
Panda 980 NA=0.13 |
||
|
Output polarization extension ratio（PER） |
dB |
> 17（polarization fiber） |
||
|
Output fiber length |
m |
> 1 |
||
|
Output connector |
|
FC/APC、others can be specify |
||
|
Dimension |
mm |
270(L)×235(W)×105(H) |
||
Remark:
1. Output power can be optional, typical output power 10mW, 20mW, 50mW, 100mW
2. Stability output condition is under 250C, after 30 mins. Warm up the instrument
3. Max power consumption is under the extreme working condition
Spectrum diagram:
Standard type:
Gain flatness type:
Ordering Information:
STC-OLS-1.0umASE-SM --
STC-OLS-1.0umASE-PM --
PW: Output power (mW)
Eg: 30-30mW 50-50mW
FL: Type of Spectrum flatness
1-Standard type.
2-Grain flatness