Applicable fibers |
SM(G.652 & G.657)、MM(G.651)、DS(G.653)、NZDS(G.655)and User-defined fiber |
Actual average splice loss |
0.02dB (SM)、 0.01dB (MM) 0.04dB (DS∕NZDS) |
Return loss |
> 60dB |
Splicing time |
Typical 9 sec |
Tube heating time |
Typical 30 sec (The heating time can be set and the heater temperature is adjustable ) |
Fiber alignment mode |
Core alignment, Cladding alignment, Manual alignment |
Fiber diameter |
Cladding diameter :80 to150µm, Coating diameter:100 to1000µm |
Fiber cleaved length |
10 to16mm with coating diameter of 250µm or less. 16mm with coating diameter of 250 to 1000µm. Optional Set-plate for 10 to 16mm with coating diameter of 250 to 1000µm is available |
Applicable protection sleeve length |
60mm, 40mm and a series of micro sleeves |
Fiber holder |
The fiber holder can be replaced, applicable bare optical fiber, pigtail, jumper, rubber-covered wire, SC connectors and other FTTx cable |
Tension test |
2N |
Fiber view and magnification |
125X magnification for single X or Y view; 65X magnification for X and Y view simultaneously |
Display |
3.5 inch color LCD monitor |
Splicing mode |
53(templet), 40(user) |
Tube heating mode |
9(templet), 24(user) |
Storage of splice result |
The last 4000 results to be stored in the internal memory |
Terminals |
USB connector for PC communication, |
No.of splice/heating with battery |
Typical 120 cycles (splice/tube heat) with inner Li-battery |
Power supply |
AC 100-240V with AC adapter; inner Li-battery(5200mAH) with external adaptor, Input:AC100-240V 50HZ; Output:DC13.5V/5A, Independent seat charger available |
Operating environment |
0~5000m above sea lever,0~95%RH and -10~+50℃,Max.wind velocity of 15m/s |
Storage Environment |
Temperature:-40~60℃, Storage Humidity:0~95% |
Dimensions |
125mm(length) x105mm (width) x113mm (height) |
Weight |
1.15 Kg excluding battery, 1.48 Kg including battery |
Standard Package |
||
Name |
Model |
Qty |
Fusion Splicer |
STC-OFS701H |
1 |
Fiber Cleaver |
STC-21F |
1 |
Fiber Stripper |
CFS-2 |
1 |
AC Adaptor |
ADC-01 |
1 |
Battery Pack |
STC-1-26CL8 |
1 |
Fiber Holders |
SC-1 |
6 |
Fiber Clip |
QXQ-01 |
1 |
Spare Electrode |
DJ-01 |
1 |
Cooling Tray |
TP-300 |
1 |
Carrying Case |
XDX-300 |
1 |
Cleaning Tool |
|
1 |
Operating CD |
|
1 |
Options |
|
Name |
Model |
Electrode |
DJ-01 |
Cleaver Blade |
DP-01 |
Battery Pack |
STC-1-26CL8 |
Fiber Holder |
SC-2 |
Stripper for rubber-covered wire |
PXQ-01 |