Applicable fibers

SM（G.652 & G.657）、MM（G.651）、DS（G.653）、NZDS（G.655）and User-defined fiber

Actual average splice loss

0.02dB (SM)、 0.01dB (MM)  0.04dB (DS∕NZDS)

Return loss

> 60dB

Splicing time

Typical  9 sec

Tube heating time

Typical  30 sec （The heating time can be set and the heater temperature is adjustable ）

Fiber alignment mode

Core alignment, Cladding alignment, Manual alignment

Fiber diameter

Cladding diameter :80 to150µm， Coating diameter:100 to1000µm

Fiber cleaved length

10 to16mm with coating diameter of 250µm or less. 16mm with coating diameter of 250 to 1000µm. Optional Set-plate for 10 to 16mm with coating diameter of 250 to 1000µm is available

Applicable protection sleeve length

60mm, 40mm and a series of micro sleeves

Fiber holder

The fiber holder can be replaced, applicable bare optical fiber, pigtail, jumper, rubber-covered wire, SC connectors and other  FTTx  cable

Tension test

2N

Fiber view and magnification

125X magnification for single X or Y view; 65X magnification for X and Y view simultaneously

Display

3.5 inch color LCD monitor

Splicing mode

53(templet), 40(user)

Tube heating mode

9(templet), 24(user)

Storage of splice result

The last 4000 results to be stored in the internal memory

Terminals

USB connector for PC communication,

No.of splice/heating with battery

Typical 120 cycles (splice/tube heat) with inner Li-battery

Power supply

AC 100-240V with AC adapter; inner Li-battery(5200mAH) with external adaptor，

Input：AC100-240V 50HZ; Output:DC13.5V／5A， Independent seat charger available

Operating   environment

0～5000m above sea lever,0～95％RH and -10～＋50℃，Max.wind velocity of 15m/s

Storage Environment

Temperature：-40～60℃， Storage Humidity：0～95％

Dimensions

125mm(length) x105mm (width) x113mm (height)

Weight

1.15 Kg excluding battery, 1.48 Kg including battery