Phone: +0086 21 54315773           Fax: +0086 21 54315979             E-Mail: sales@sh-stcomm.com               English              中文
Welcome to Shanghai STCOMM
≡  PRODUCTS LIST
Optical PON Terminal Tester-STC-PTT107
    Publish time 2019-02-22 12:03    
Optical PON Terminal Tester-STC-PTT107
Description
This STC-PTT107 PON terminal tester is a very useful tool for the contractor to check the user statues without enters into the user’s house. Connect this PON terminal tester after ODF and Splitter, between OLT and ONT, can get to know the statues of the network for ONT and OLT when the PON network have the problem, this is very convenience for operators to find the solve the problem, and also find the free ONT that did not used at user’s house, this is efficiently saving the ONT resource for contractor. 
Features
Easily checked out 8 statues for OLT and ONT and provide graph displaying.
Also can measure the output power value for 1310/1490nm in PON network.
Built-in VFL function, convenience for fiber checking.
8 Statues this PON terminal tester can find
1) OLT BREAK OFF---up stream of OLT side fault 
2) ONT TRMT FAULT---ONT device have the problem
3) USER TRMT ON-LINE---PON network works fine
4) ONT HIGH LOSS---The cable at user side have high loss which may caused by macro bending
5) ONT DISSCONNECT DEVICE---User side did not connect with ONT device
6) ONT TRMT POWER OFF---User side already connect with ONT device, but ONT did not power on or not register
7) ONT NETWORK BLOCK---Cable break at ONT side
8)ONT TRMT CONNECTOR FAULT---User side connector end-face have quality problem or ONT device connector not clean. 
Specifications

Model

STC-PTT107

Judgment Mode

Total Mode

8

Output Power Value Measurement

Calibration Wavelength

1310nm

1490nm

Pass Zone(nm)

12601360

14701505

Isolation (dB)

>40@1490

>30@1310

Isolation(dB)

>40@1550

>40@1559

Measurement Range(dBm)

-40+10

-40+10

Measurement Accuracy

Connatural uncertainty(dB)

±0.5

Linearity(dB)

±0.1

Passing through insertion Loss(dB)

<1.5

Detector Type

InGaAs

Optical Connector

FC/SC Interchangeable

Fiber Type

9/125um

VFL Mode

Output power

1mW or 10mW

General Information

Display

TFT

Measurement Unit

dB/dBm/xW

Resolution (dB)

0.01

Power Supply

3  AA1.5V battery

Operation Temperature()

-1060

Storage temperature()

-2570

  Dimension(mm)

200 X90 X50

  Weight(g)

285