Phone: +0086 21 54315773           Fax: +0086 21 54315979             E-Mail: sales@sh-stcomm.com               English              中文
Welcome to Shanghai STCOMM
≡  PRODUCTS LIST
Dual ChannelBench-top Mandrel Free Insertion and Return Loss test station --STC-MFIRL4201(DC)
    Publish time 2019-02-22 10:38    
Dual ChannelBench-top Mandrel Free Insertion and Return Loss test station --STC-MFIRL4201(DC)
This test station is designed especially for different connector on both sides patch cord(such as FC-SC, SC-LC, SC-LC…), the REF for insertion and return loss can set one time for those kind of patch cord, no need to change standard patch cord and interchange testing port connector on tester( Especially 2.5mm and 1.25mm interchange). For the tested patch cord, APC end no need to manually set standard patch cord length if PC end measured shortest length is 2.2M.
One key setting insertion and return loss REF value, is much more convenience for operators and easy training. This device can directly do the label report setting and real time data printing.
Integrating sphere design will make easier measurement on simplex patch cord, duplex patch cord, hybrid patch cord, and LC duplex uni-boot patch cord.
MM satisfy with standard: IEC-61280-4-1
Specifications

Model

STC-MFIRL4201(DC)

Return Loss Measurement

Wavelength

1310/1550nm or 850/1300nm

Measurement Range

0~ 75 dB

Calibration Wavelength

1310/1550nm or 850/1300nm

Measurement Linearity                                                     

±2dB

Mandrel-free minimum distance

1.5 meters (APC end)

2.2 meters (UPC end)

Laser Source Module

       Wavelength

1310/1550nm or 850/1300nm

Output Power

≥-3dBm

Output Stability

±0.005dB (one hour @ 25)

Connector type

FC/APC

Model

STC-MFIRL4201(DC)

Return Loss Measurement

Wavelength

1310/1550nm or 850/1300nm

Measurement Range

0~ 75 dB

Calibration Wavelength

1310/1550nm or 850/1300nm

Measurement Linearity                                                     

±2dB

Mandrel-free minimum distance

1.5 meters (APC end)

2.2 meters (UPC end)

Laser Source Module

       Wavelength

1310/1550nm or 850/1300nm

Output Power

≥-3dBm

Output Stability

±0.005dB (one hour @ 25)

Connector type

FC/APC