Phone: +0086 21 54315773           Fax: +0086 21 54315979             E-Mail: sales@sh-stcomm.com               English              中文
Welcome to Shanghai STCOMM
Search
≡  PRODUCTS LIST
Home >> Other Related Products >> Core to Core Optical Fusion Splicer-STC-OFS701C
Core to Core Optical Fusion Splicer-STC-OFS701C
    Publish time 2019-02-20 11:26    
Core to Core Optical Fusion Splicer-STC-OFS701C
This Optical Fiber Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. Fiber loading becomes more convenient and accurate thanks to the ceramic V-groove of high precision, which is easy for clean and maintenance. The splicer is capable of dual-directional fusion. The monitor is a touch screen delivers fresh designed graphical interfaces, which are simple for operation. The modular pluggable lithium-ion battery of large-capacity ensures long-time field operations. The auto environment compensation system greatly improves adaptability of the splicer to  hostile environments, so that low-loss splice can be remained consistent in various environments. 
Features
  6 Motors
  Core to core Alignment method make lower splicing loss
  Small size, light weight
  7s fast splicing, 18s highly efficient heating
  320 times image magnification, 5mm fusing for ultra-short cleave length
  300 groups of splice modes, 100 groups of heating modes, 10000 groups of fusion records /64 images storage
  Ceramic presser foot, ceramic V-groove, all-in-one fixture
  Dual-directional fusing, auto fusing, intelligent heat shrink
  USB and SD card interface, auto update of U disk
  Built-in modular lithium-ion battery, at least 220 counts of splicing and heating cycles
  GUI (graphical user interface) and touch screen, convenient for operation
  Dust-resistant, water-resistant, shock-resistant, greater environment adaptability

Specifications:

Motor qty

6

Alignment method

Core to core, Cladding alignment, manual alignment

Applicable fibers

Any common optical fibers, rubber-insulated fibers and jumpers   that meet    requirements of ITU-TG.651~653,   ITU-TG.655 and ITU-TG.657.

Optical fiber diameter

Cladding: 80～150μm, coating layer:   0.1～3mm

Cleave length

5～16mm（coated optical   fiber diameter≤250μm）；10mm（coated   optical    fiber diameter：0.25~3mm）

Splice loss（typical）

0.02dB（SMF）; 0.01dB（MMF）; 0.04dB（DSF）; 0.04dB（NZDSF）

Return loss

Better than 60dB

Splicing time   (typical)

7s (Fast mode)

Heating time   (typical)

Less than 18S

Tension

1.96～2.25N

Protection sleeve

60mm, 40mm and a   series of protection sleeves

Graphical display

High-performance 4.3 inch LCD

Magnification time

320 times/88 times. 700X

Fusion records

10000 groups/64 Pictures

Remote maintenance

55W

Battery capacity

11.1V, 6400mAh

Battery service   life

Cycle charging: 300～500 counts, can be   replaced by customers

Electrode service   lif

Typical: 4000 counts, can be replaced by customers

Construction   lighting

Built-in lights with high-brightness and wide lighting area

environment

Temp:-10～50℃；Hum: 0～95%RH，height above sea   level: 0～6000m

Operation   interfaces

GUI (graphical user interfaces)

External power

AC: 100～240V, 60Hz, 0～1.5A; DC: 10～15V

Port

USB / SD

Dimension

120mm（W）×130mm（H）×154mm（D）（without rubber   anti-vibration pad）

Weight

1.7kg （the battery not included）, 2.0kg（included the   battery）